Mac Right Click For Windows Bootcamp

Installing Windows on a Mac should be a piece of cake with Bootcamp, but thatrarely is the case. In fact, I would personally say that Boot Camp Assistantis one of the worst apps that comes with OS X and unlike the rest, it doesn’twork seamlessly.

  1. Right Click Mac Windows 10
  2. Boot Camp How To Switch Back To Mac
  3. Boot Camp Drivers For Windows 10
  4. Mac Right Click For Windows Bootcamp 10
  5. Right Click Not Working Bootcamp

Right-click in Windows with Boot Camp on Mac. In Windows on an Intel-based Mac, you can do a secondary click, or right-click, using an Apple Mouse, Magic Mouse, or trackpad. Apple Mouse or Magic Mouse: Click the upper-right corner of the mouse. Trackpad: See Set trackpad options in Windows. The third-to-last line reassigns the enter button right next to the arrow keys on a MacBook Pro to Delete. The second-to-last line effectively remaps your right Apple Command / Windows button into a right-click event! It's conveniently close enough to the trackpad that it's really not even a pain to use, and IMO even easier than Ctrl+Click in OS X.

Apparently for the newer version of Bootcamp, they replaced the right-click method from a background program (much like Brightness.exe and AppleTime.exe), to an actual Trackpad driver that will.

A few of its drawbacks:

  • It only supports a drive with a single partition.
  • It often throws very obscure error messages with limited detail.
  • It re-downloads 1.6 GB Windows drivers every single time it runs. These areplaced under /Library/Application Support/BootCamp/WindowsSupport.dmg anddeleted and re-downloaded each time Boot Camp Assistant starts processing.

This post did take a lot of work to complie and I did bone my hard drive afew times while trying certain ideas, so please throw out a thanks if ithelped you out :)

Disclaimer: This guide below contains procedures which can potentiallydestroy your partitions and data. I accept no responsibility for such loss soplease proceed at your own risk.

Update (2016-07-20): I have updated this post with further improvementsrelating to downloading of Boot Camp drivers and ensuring that a Hybrid MBR isnot used (which would cause issues when installing Windows).

  • An 8 GB or larger USB stick
  • A copy of the Windows 10 ISO
  • A valid Windows 10 license
  • A downloaded copy of unetbootin
  1. Start Boot Camp Assistant
  2. Select Action / Download Windows Support Software
  3. Choose your Downloads directory, enter your password and then clickSave

This will be the only step that we will use Boot Camp Assistant for.

Formatting Your USB Stick

Attach your USB stick and start Disk Utility, select your USB drive in theleft panel under External, click Erase and set the options as follows(exactly) and click Erase:

Name: FAT32
Format: MS-DOS (FAT)
Scheme: Master Boot Record

Turning Your USB Stick into a Windows Installer

Open unetbootin, enter your password, set the options as follows andclick OK:

Diskimage: checked, set to ISO and browse to your Windows 10 ISO
Type: USB Drive
Drive: Your USB drive (you should only see one entry here)

If you see more than one drive listed, you may confirm which is your USB driveby opening the Terminal and typing:

You’ll see your USB drive in the output and it should look something like this: Download odin 3.09 for mac.

Once you have kicked off unetbootin, grab a snack while the Windows ISO iscopied to the USB stick. This process takes around 15 minutes to complete.

Finishing Up

When this has completed, you may right click on the USB stick in Finder,select Rename “FAT32” and rename it as you like (I’ll call mine“WINDOWS 10”).

Finally, copy the WindowsSupport in your Downloads directory tothe Windows 10 USB stick so it’s easy to get to after our installation.

In Disk Utility, select your internal hard drive on the left panel, andclick on Partition.

Click the + button and create a new partition of your desired size for yourWindows installation and name it as you wish (I’ll call mine “BOOTCAMP”). Ensure that the Format is set to MS-DOS (FAT) and click on Apply.

Huge thanks to Rod’s post from the superuser post titledWindows detects GPT disk as MBR in EFI boot.

Once you add a FAT32 partition with either Boot Camp Assistant or Disk Utility,your disk is converted into a hybrid GPT / MBR disk which is actually notsupported by newer versions of Windows. In this step, we revert thisadditional change made by Disk Utility by switching back to a pure GPTpartition table.

  1. Dowload the latest version ofGPT fdiskby browsing to the version, then gdisk-binaries and clicking the filewith the *.pkg extension (e.g. gdisk-1.0.1.pkg).
  2. Install GPT fdisk by running the installer you downloaded
  3. Open a Terminal and check the state of your MBR

    If your MBR partition is set to hybrid, please continue with step 4,otherwise if it is set to protective, you may skip the rest of thissection. Simply type q and hit return to exit GPT fdisk.

  4. Type p to view the existing partition table and verify you’re workingon the correct disk

  5. Type x to enter the expert menu

  6. Type n to create a fresh protective MBR

  7. Type w to save your changes and confirm the change when asked

  8. Type q to exit GPT fdisk

  9. Run GPT fdisk to show your disk layout:

    Your partition table should look something like this:

Disconnecting All Devices From USB Ports

This step is critical as I have had rather serious problems during Windowsinstallation when certain external drives are connected.

Unplug everything from your Mac except your keyboard (if wired) and yourbootable Windows USB stick (which we prepared earlier).

Windows

If your Mac contains multiple physical drives, you will need to disconnectall disks except the one which you intend to install Windows on or you mayencounter the following error:

Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation.

Booting From the USB Stick

Ensure that the USB stick containing the Windows installer is inserted andthen restart your Mac while holding down the option (alt) key.

You should now be presented with a list of bootable drives. Select the USBdrive (usually titled “EFI Boot”) to begin installing Windows.

Correcting Your Windows Hard Disk Partition

When you are asked Where do you want to install Windows?, select theWindows partition created earlier (which I called “BOOTCAMP”) and clickDelete.

Next, select the chunk of Unallocated Space and click on New to createa proper Windows NTFS partition.

Note: OS X only supports creation of FAT filesystems, so this is why we needto re-create the partition ourselves during install.

Completing the Installation

Allow the installer to complete and boot into Windows.

Installing Boot Camp Support Software

Once Windows is up and running, install the Boot Camp Support software runningWindowsSupport/BootCamp/Setup.exe on your USB stick.

Note: The installer takes a little while to show up, so please be patient.

You may encounter a known issue whereby the Boot Camp Support Softwareinstaller locks up while installing Realtek audio.

If this occurs, you will need to open Task Manager and kill theRealtekSetup.exe process.

After the installer has completed, answer No when prompted to rebootand install the Realtek drivers manually by running%USERPROFILE%AppDataLocalTempRarSFX0BootCampDriversRealTekRealtekSetup.exe.If you can’t find this file, check any other directories starting withRARSFX under %USERPROFILE%AppDataLocalTemp.

Once complete, reboot Windows.

  • The latest version of SharpKeys
  • The flipflop-windows-sheel binary (see README for a download link)

Mapping Your Mac Keyboard

Install and run SharpKeys and then configure the following mappings tocorrect your Mac keyboard so that it behaves like a regular Windows keyboard:

Function: F13 -> Special: PrtSc
Special: Left Alt => Special: Left Windows
Special: Left Windows => Special: Left Alt
Special: Right Alt => Special: Right Windows
Special: Right Windows => Special: Right Alt

Note: for F13, you’ll need to select Press a key and click F13 on yourkeyboard.

Switching to Natural Scrolling

Right Click Mac Windows 10

If you wish to flip scrolling direction to match that on OS X, runFlipWheel.exe and then click on Flip All.

Enabling Num Lock on Boot

Paste the following into a file named Enable NumLock on Boot.reg thenimport this into the registry to enable NumLock when Windows boots up(it doesn’t by default).

Completing Configuration

That’s it, give your machine one last reboot and you’ll have a fully workingWindows 10 installation.

Note: I have found Apple’s Magic Mouse to be extremely unreliable usingthe Boot Camp drivers from Apple. As such, I recommend purchasing a Logitech(or similar) mouse for use in Windows. I have no trouble plugging thewireless receiver for my Logitech mouse into one of the USB ports of my wiredApple Keyboard and it’s so tiny that you can’t see it at all.

Removing the Windows Partitions

If you decide to remove Windows, you may find that Disk Utility doesn’t allowyou to delete the two partitions that have been created by the Windowsinstaller.

This happens due to the fact that the first small partition created is of atype called Microsoft Reserved which OS X’s Disk Utility doesn’t support.

The safest way to delete these partitions is through the Windows installer. Sosimply boot from your USB stick as we did before and when you reach theWhere do you want to install Windows? question, you may delete your“BOOTCAMP” partition and the small 16 MB partition of type MSR (Reserved)just above the BOOTCAMP partition.

Once done, simply quit the installer by clicking the X in the top right cornerof each Window and reboot back into OS X.

Removing the Boot Entry

Even though we have removed the Windows partition, a boot entry will still bepresent when holding down option (alt) during boot.

You may remove these items by running the following in your Terminal:

For the first 20 years or so of its life, the Mac was infamous for having only a single button on its mouse. That meant there was no way to right-click on a Mac mouse. However, you could achieve the same thing by pressing the Control key and clicking with the mouse button. The Control-click was the Mac right-click. On websites and applications that supported right-click, Control-clicking still achieves the same thing on Mac as right-clicking does on a PC mouse.

Fast forward several years and Apple mice still don’t have a right button, in fact they don’t have any buttons at all. And neither do the trackpads on the MacBook, MacBook Air or MacBook Pro. Now, however, macOS has support for right-clicking, or secondary clicking, as Apple calls it. And so if you buy a third party mouse with a right button, you’ll be able to use it to, for example, pull up a contextual menu.

How to right click on a MacBook

Apple calls the function most people understand as a ‘right click’ a ‘secondary click.’ That’s because there are a number of options for performing the action. However, it amounts to the same thing. To set up the secondary click on a MacBook, MacBook Air, or MacBook Pro, do the following:

  1. Go to the Apple menu and select System Preferences.
  2. Click on the Trackpad pane.
  3. Choose the Point & Click tab.
  4. Check the box next to secondary click.
  5. Click on the little down arrow.
  6. Choose Click with two fingers; Click in bottom right corner; or Click in bottom left corner.

If you prefer tapping to clicking on the Trackpad, check the box labelled Tap to click. You’ll notice that in the Secondary click options, ‘Click with two fingers’ has changed to ‘Click or tap with two fingers.’

While you’re in the Trackpad pane, you can also configure the Tracking Speed of the pointer, that is how quickly the pointer moves across the screen as you move your finger on the trackpad. Just move the slide right to make it go faster or left to make it go slower.

You can also configure the gestures for scrolling and zooming, as well as gestures for other features such as Mission Control, App Exposé, and Notification Center.

You might find that after you’ve configured the secondary click, the option you’ve chosen doesn’t suit you — you might invoke it accidentally, or it might be uncomfortable to use. If so, just go back to System Preferences and choose another option.

Boot Camp How To Switch Back To Mac

How to right click on a Mac mouse

Apple’s Magic Mouse may not have a visible right button, but underneath that sleek white shell, it can differentiate between a left click and a right click, in the same was as the trackpad on a MacBook. Here’s how to configure the right, or secondary, click on a Mac mouse.

  1. Launch System Preferences from the Apple menu or by clicking it in the Dock.
  2. Click on the Mouse pane.
  3. Click on the Point & Click tab.
  4. Check the box next to Secondary click.
  5. Choose ‘Click on the right side’ to enable right-click on a Mac mouse.

Note: If you have an Apple mouse, you can have the left side as the secondary click and the right side as the regular click. To enable that, just select ‘Click on the left side’ instead.

While you’re in the Point & Click tab, you can use the slider to adjust the tracking speed of the mouse.

How to change the speed of double-clicking your mouse

For most of us, the default speed for double-clicking a mouse button works just fine. But for some users, with different requirements, an adjustment may be needed. You can change the length of time macOS waits for a second click in order to register a double-click, which is useful if you have difficulty moving your fingers quickly.

To adjust the double-click speed, do the following:

  1. Launch System Preferences and click the Accessibility pane.
  2. Click Mouse & Trackpad in the left hand sidebar.
  3. Drag the slider next to ‘Double-click speed’ to the left to make macOS wait longer for the second click.

Boot Camp Drivers For Windows 10

While you’re in that pane, you can also change the delay that occurs when you drag a file over a folder and wait for it to spring open automatically. If you find that if you drag files over folders and the folders spring open unintentionally, you can slow down the spring load speed. Or if you find you have to wait too long when you want a folder to open, you can do the opposite. Drag the slider next to ‘Spring-loading delay’ to the left to make the folder open quickly, or to the right for a longer delay.

Pro tip: The Mac right-click function is managed using the Trackpad, Mouse, and Accessibility System Preferences panes. These are all standard macOS System Preferences. However, third party apps and plug-ins also install their own panes sometimes. Mostly, that’s fine — it’s the way you control the app or plug-in. But sometimes it can cause a problem, such as when Flash gets out of date.

Mac Right Click For Windows Bootcamp 10

In cases like that, you can use CleanMyMac X’s Extensions utility to safely uninstall it. Just click on the Extensions utility, choose Preferences panes, check the box next to the one you want to delete and click Remove. You can download CleanMyMac for free here.

As you can see, it’s very easy to right click on a Mac and to configure how the click works using System Preferences. And it works the same way for the Trackpad, too. Both are configured from their own panes in System Preferences. And additional options can be found in System Preferences’ Accessibility pane.

Right Click Not Working Bootcamp

These might also interest you: