Download Windows Xp Network Drivers

Download Intel Network Adapter Driver 17.2 for Windows XP 64-bit. OS support: Windows XP 64-bit. Category: Networking.

Download Intel Ethernet Network Adapter Driver 18.0 for Windows XP 32-bit. OS support: Windows XP. Category: Networking. The Windows XP startup disk allows computers without a bootable CD-ROM to perform a new installation of the operating system. The Windows XP startup disk will automatically load the correct drivers to gain access to the CD-ROM drive and start a new installation of Setup.The Windows XP startup disk allows computers without a bootable CD-ROM to perform a new installation of the operating system.

Networking Basics - Certifications - Windows 7 - Windows 8 - Home Network Setup - Wireless Setup:: About- Contact - Search

To install a network driver in Windows XP you will need to first make sure you can locate the driver for your machine.

If you have a new USB wireless adapter, then there should be a setup CD that came with the adapter. This CD contains the driver and you should load the CD and follow the installation instructions.

Windows Xp Sp3 Network Drivers Download

What is a device driver?

A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer, won't work. Your mouse, keyboard, webcam and printer all have drivers which allow it to communicate with your system.

Download the driver from the Vendor's website

If you don't have the CD then no worries, you can always download it from the manufacturer's website. I actually recommend you always download the driver from the manufacturer's website because it is guaranteed to be the latest updated driver. You can always download any driver from any manufacturer for any device you plan to install on your Windows system.

When you upgraded from Windows XP to Windows Vista or Windows 7, then you are left with the old CD that has the old driver. Use the manufacturer's website and they should have the latest driver for your operating system.

How to Install a Network Driver?

1.) Plug in the USB wireless adapter into the USB port on your laptop or computer.

The Found New Hardware Wizard starts.

Select 'No, not this time' to not allow Windows Update to search for the software.

Download Network Drivers For Windows Xp

2.) Next select the first choice if you have the vendor's CD in your computes CD drive already.

If you don't have the CD that came with the USB wireless adapter, then make sure you first download it from the vendor's website and return here and select Install from a list or specific location (Advanced)

3.) Here you can browse to the location of your downloaded driver or search your CD-ROM for the USB wireless adapter's installation CD which will have the driver also.

I recommend you download the latest driver from the manufacturer's website.

Once you have selected the folder where the driver is downloaded, click Next.

4.) The next screen will show the driver being installed and confirm that it was installed successfully.

Using Device Manager to Install a Network Driver

If you plug your USB wireless adapter and the Found New Hardware Wizard did not start, then follow these steps to scan your computer for hardware changes and install the driver.

1.) If you have the My Computer icon on your desktop----------------------------------->>>>

then right-click the icon and click Properties

The System Properties window opens.

You can also get to the System Properties window by clicking - Start > Control Panel > System

2.) When the System Properties window opens, click the Hardware tab and then click Device Manager

3.) The Device Manager window opens, right-click the computer name on the top and click Scan for hardware changes

This will detect any new device that has recently been connected to your computer. If it doesn't detect your USB wireless adapter then unplug it and plug it in again.

Download guitar pro 6 full version mac. If it detects the USB wireless adapter, the Found New Hardware Wizard should launch.

4.) If the Found new hardware wizard did not launch after doing the Scan for hardware changes then look through the list for a yellow question mark like this ---------------->>>>>>>>

This means it detected the new hardware and it is asking for the driver to communicate with the device.

5.) Right-click the device and click Update Driver

This will launch the Hardware Update Wizard (looks similar to the Found New Hardware Wizard)

Follow the steps to locate the driver or CD-ROM.

Once the installation of the driver is complete then your device should not have a yellow question mark and should be functioning correctly.

Click here to go to the tutorial on how to connect to a wireless network.Drivers

Download Network Drivers Windows Xp Service Pack 2

'Didn't find what you were looking for? Use this search feature to find it.'


Did You Like This Page?

New! Comments

Have your say about what you just read! Leave a comment in the box below.

Share This Page

Download Windows Xp Network Drivers
643 downloads·Added on: March 14, 2013·Manufacturer: INTEL
This package contains the files needed for installing the Ethernet driver. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.

Download Windows Xp Network Drivers

To install this package please do the following:

Windows Xp Network Drivers Download

- Save the downloadable package on an accessible location (such as your desktop).
- Unzip the file and enter the newly-created directory.
- Locate and double-click on the available setup file.
- Allow Windows to run the file (if necessary).
- Read EULA (End User License Agreement) and agree to proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and perform a system reboot to allow changes to take effect.

Download Wifi Network Adapter For Windows 10

About Ethernet Drivers:

Network Drivers For Windows Xp

Windows platforms generally apply a generic driver that allows motherboards to recognize the Ethernet component.
However, in order to make use of all network card (adapter) features, you must install a proper LAN driver that enables the hardware. This task enables systems to connect to a network, as well as collect all component characteristics such as manufacturer and chipset.
If you intend to update the driver version, know that this process can add support for new OSes, fix different compatibility problems, resolve related errors encountered during the product's lifetime, as well as include various other changes.
When it comes to the actual installation procedure, we should note that most producers try to make it as easy as possible, so following the steps should be a breeze: just get the downloadable package, run the setup, and follow the on-screen instructions.
There is a chance that other OSes could also be suitable, but it is not advisable that you install this release on platforms other than the specified ones. Remember to perform a system reboot once done, to allow all changes to take effect properly.
Therefore, if you wish to apply this version, click on the download button and enable your network card. To stay up to speed with the latest updates, check back with our website as often as possible.

It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Windows XP
file size:
18.4 MB
Network Card